Shackle waa qalab ku -shubasho lagama -maarmaan ah kor u qaadista hawlaha dhismaha. Shackle waxaa loo isticmaali karaa in lagu xiro garbaha qaadista iyo wadhfiyeyaasha go'an. Waa qalab isku xira iftiin iyo dabacsan oo si weyn loo isticmaalo.Silsiladowaxaa loo qaybin karaa silsiladaha qaansada iyo silsiladaha U-qaabeeya marka loo eego astaamaha muuqaalkooda. Sida ujeedadu tahay, waxaa jira: silsiladaha silsiladda, silsiladaha barroosinka, iyo silsiladaha sabayn.
(1) Silsiladdaxarig is a xarig used to connect the anchor chain. When in use, the horizontal bolt should be upward, and the horizontal bolt should be round to prevent it from rotating in the bolt hole and increase its strength. When using, first take out the horizontal bolt of the xarig, put the U-shaped buckle into the anchor chain ring to be connected, and then connect the horizontal bolt in series to an anchor chain ring above. In order to prevent the horizontal bolt from coming out, there is an oblique hole at each of the two ends of the horizontal bolt and the U-shaped buckle for driving the brake oblique pin. In order to prevent the oblique pin from coming out, a green lead seal should be inserted into the cavity left at the pin hole. Before the oblique pin is inserted into the pin hole, calcium-based grease should be applied to prevent rust.
(2) Barroosinka xarig is the xarig used to connect the anchor chain and the sinker, and the method of use is the same as the chain xarig.
(3) The floating xarig is the xarig used to connect the floating body and the anchor chain, and the method of use is the same as the chain xarig.
